Vinyl Graphics Care

The Do's:

Use clean water and a mild car wash to clean vinyl graphics
Before using any cleaning solution, test it on a small portion of the vinyl graphics
Learn about proper safety instructions by reading the warning labels
Rinse the vinyl graphics with clean water immediately after cleaning it with the soapy water blend
After washing, use a microfiber cloth or let the vehicle air-dry

The don'ts:

The vinyl shouldn't be in contact with fuels for a long time, so clean all spills as soon as you can
Avoid using automated car washes, truck washes using caustic cleaners, or pressure washers to clean your vehicle
Refrain from applying carnauba-based wax over vinyl graphics
Don't apply any type of wax or polish to matte or carbon-fiber finished vinyl's
Mechanical brush washing shouldn't be used

Only when no other cleaning methods are available, pressure washing should be used. Repeated pressure washing on vinyl graphics must be avoided.

If you are unable to remove the debris using normal methods, then try any one of the following methods:

Procedure to wash vinyl vehicle graphics:

1. Clean the graphic with water to clear any loose sediments, dust, or dirt.

2. Mix water and the mild detergent in a clean bucket.

3. Immerse your sponge with the water and soap mixture.

4. Clean the graphic starting from the top and scrubbing down to the bottom.

5. Clean the graphic with clean water.

6. Once the graphic is cleaned, allow it to air-dry or use a microfiber cloth to dry the graphic.

7. After letting it dry, for added protection, you may apply a silicone or Teflon-based polish designed for vinyl vehicle graphics.

Call MR Vinyl Graphics & Apparel to schedule an appointment.

Don't Let Another Potential Customer Pass You By!!